Homeowners across Clark County are choosing to elevate their curb appeal with professionally installed stone veneer. From entry columns to garage fronts, this upgrade gives a property more character and visual weight without the cost or complexity of full masonry.
But one of the most common questions we get at David’s Stone is simple:
“How much does it cost to add stone to the front of my house?”
In this guide, we’ll walk you through the average costs for stone veneer in 2026, what’s included in the price, where you’ll typically see stone applied on a residential home, and what drives pricing up or down. You’ll also learn why stone veneer is one of the most practical upgrades for long-term value and appearance.
What is Stone Wainscoting?
Most builder-grade homes in Clark County include partial-height stone veneer on the front exterior. This design feature is known as stone wainscoting—a lower section of stone, typically installed along the bottom 3 to 4 feet of wall, to create visual interest and contrast against siding.
Common areas for wainscoting include:
- Both sides of the garage
- The front porch or entryway
- Around structural or decorative columns
- Bases of exterior walls or bump-outs
This style is clean, intentional, and cost-effective. You get the high-end look of masonry without the expense of covering an entire wall.
What Factors Affect the Final Price?
Every project is different, but several key variables determine whether your total cost falls on the lower or higher end of the range.
1. Type of Stone
Manufactured stone veneer costs less than natural stone. It’s lighter, easier to cut, and faster to install. Most of the time, manufactured stone is the best choice for residential front facades.
However, some homeowners opt for premium materials or specific brands that raise the material cost significantly. The price for materials alone increases from 1.5 to 2 times more.
2. Size and Scope
A basic 3-foot wainscot across a two-car garage requires far less labor and material than full-height stone across an entire front elevation. More surface area means more prep work, more stone, and more time.
3. Removal of Existing Siding
Removing vinyl or fiber cement siding adds labor hours. If the old siding is damaged, water-stained, or full of fasteners, extra cleanup may be required before installing the moisture barrier and lath.
4. Access and Site Conditions
Tight spaces, sloped terrain, or landscaping that needs protecting can slow the crew down. These logistical factors increase labor time and can impact the estimate.
5. Custom Details
Cutting stone to wrap columns, angle around trim, or create custom edges takes skill and time. Projects with multiple returns or architectural breaks cost more than a simple, flat install.
What’s Included in a Stone Veneer Quote?
A professionally prepared quote for stone veneer should always include the following:
- Demolition and disposal of old siding or trim
- Moisture barrier and drainage plane
- Metal lath installation
- Scratch coat and mortar application
- Stone veneer installation and joint work
- Custom cutting and placement
- Final clean-up and sealing (if applicable)
At David’s Stone, our quotes also include framing for columns, hand-set caps, and any necessary adjustments to existing trim or flashing.We believe in transparent pricing, so you know exactly what’s being delivered—no surprises.
Why Homeowners Are Choosing Stone in 2026
Stone veneer has become one of the most popular curb appeal upgrades in the Pacific Northwest. It checks every box:
- Durability
When installed correctly, manufactured stone veneer holds up for decades against rain, wind, and temperature changes. - Low Maintenance
Unlike paint or wood siding, stone doesn’t peel, rot, or require constant upkeep. It’s largely self-maintaining. - Timeless Style
Stone creates texture, contrast, and depth. It pairs well with both modern and traditional architecture and doesn’t fall victim to trends. - Home Value
Homes with well-installed stone accents consistently appraise higher. Buyers see it as a high-quality feature that sets a home apart.
Should You Wrap Columns Too?
Many homeowners start with the idea of a small wainscot install, then realize that unified design looks better across the front elevation. Wrapping the porch or entry columns with the same stone helps tie everything together.
Wrapped columns add depth and symmetry, especially when matched with a stone base along the garage or porch skirt. For roughly $1,500 per column, this feature gives the front of your home a more substantial, custom-built feel.
Will Stone Veneer Hold Up in the Pacific Northwest?
Clark County homes face a wet, windy climate with long rainy seasons. Stone veneer is well suited for this environment, but installation matters. Stone needs proper drainage, flashing, and joint work to resist moisture intrusion.
At David’s Stone, we install using regional best practices for long-term performance in wet weather. We select quality materials, verify moisture protection steps, and take the time to hand-place every piece.
How Long Does Installation Take?
Most front-facing stone veneer projects take 2 to 5 days, depending on scope and weather conditions. Columns take roughly a day each.
We schedule jobs with minimal disruption to the homeowner and always maintain a clean, safe work site. Before starting, we walk through the schedule with you so you know what to expect at each step.
How Do I Get a Quote?
To get an accurate quote, many homeowners start by sharing a few clear photos and basic measurements. In many cases, this is enough to provide a preliminary estimate for the cost of stone veneer. Every house is unique, but with the right details, we can often give you a solid starting point remotely.
When a more detailed review is needed (or if you prefer to walk the site with a specialist) David’s Stone also offers in-person consultations across Clark County. We take the time to understand your goals, identify any challenges, and build out a quote tailored to your specific project.
Whether we review the project digitally or in person, our goal is to give you clarity on pricing and options, without surprises.
Contact us for a quote!
Check out some more resources from David’s Stone:
- How Much Does It Cost to Wrap My Brick or Sheetrock Fireplace with Stone Veneer in 2026?
When planning a stone veneer project, one of the most important decisions is choosing between manufactured stone and natural stone. Both options have distinct advantages and drawbacks, and the right choice depends on your priorities, budget, and project requirements. - How Much Does a Wood Burning Fireplace Cost in 2026? A Complete Breakdown for HomeownersWhen planning a stone veneer project, one of the most important decisions is choosing between manufactured stone and natural stone. Both options have distinct advantages and drawbacks, and the right choice depends on your priorities, budget, and project requirements.
- How Much Does It Cost to Rebuild Porch Columns with Stone Veneer in 2026?When planning a stone veneer project, one of the most important decisions is choosing between manufactured stone and natural stone. Both options have distinct advantages and drawbacks, and the right choice depends on your priorities, budget, and project requirements.
